ELECTRONIC TIMERS

Solid state, programmable electromechanical timers and electric switches by application and mechanism. Available timers include ON/OFF delay, interval, one shot, recycle/flasher, programmable recycling, percent, retriggerable, alternating and reversing controls.
Inquiry
Input voltage application starts preset time delay. At end of delay load turns ON. Remove input voltage to reset.
More Information
Input voltage is continuous. Closing the initiate switch turns the load ON. Preset delay time starts when initiate switch opens. At the end of the delay time, the load turns OFF. Reset is automatic.
More Information
Input voltage application turns load ON and starts preset time interval. At the end of the preset interval, the load turns OFF. Remove input voltage to reset.
More Information
Input voltage is continuous. Closing the Initiate switch turns the load ON and starts the preset time delay. At the end of the preset delay the load turns OFF. Reset is automatic.
More Information
When input voltage is applied the load cycles ON/OFF (reverse sequence available). Equal ON/OFF times. Remove input voltage to reset.
More Information
When input voltage is applied, the load cycles ON-OFF...Reverse sequence available. Unequal ON/OFF times are independently adjustable. Remove input voltage to reset.
More Information
When input voltage is applied, the load cycles ON-OFF...ON and OFF times are varied inversly by a potentiometer with 2 resistive elements on a common shaft. Increasing the ON time also decreases the off time while holding the total time (ON plus OFF) constant. Remove input voltage to reset.
More Information
Input voltage is continuous. Closing the initiate switch turns the load ON and starts the pre-set time interval. Subsequent operation of the initiate switch will re-start the time interval while holding the load ON. At the end of the time interval, the load turns OFF. Reset is automatic.
More Information
Input voltage is continuous. Closing the initiate switch turns the load ON and starts the pre-set time interval. Subsequent operation of the initiate switch will re-start the time interval. While holding the load ON. At the end of the time interval, the load turns OFF. Reset is automatic.
More Information
Input voltage application starts the pre-set time interval. At the end of the delay time, the load turns ON, and the pre-set time interval starts. When the interval delay time ends, the load turns OFF. Delay/interval times are independently adjustable. Remove input voltage to reset.
More Information
When input voltage is applied, the load pulses ON-OFF...until the time interval is completed. Equal ON/OFF times. Pulse and interval times are independently adjustable. Remove input voltage to reset.
More Information
Application of input voltage activates the flip flop action of two separate loads. Both ON times and OFF times are equal. Remove input voltage to reset.
More Information
Input voltage application causes load 1 to turn ON. When pre-set time has elapsed load 1 turns OFF for a pre-set OFF time. Load 2 now turns ON then turns OFF. The cycle now repeats. ON/OFF times are independently adjustable. Remove input voltage to reset.
More Information
Copyrights © 2018 All Rights Reserved by Prime Technology.