ELECTRONIC TIMERS

Input voltage is continuous. Closing the initiate switch turns the load ON and starts the pre-set time interval. Subsequent operation of the initiate switch will re-start the time interval while holding the load ON. At the end of the time interval, the load turns OFF. Reset is automatic.
Timers By Function Inquiry
  • Construction (footprint): Cube
  • Load Max: 1 Amp
  • Size - 2"x 2" x 53/64"
More Information
  • Construction (footprint): Cube
  • Load Max: 1 Amp
  • Size - 2" x 2" x 53/64"
More Information
  • Construction (footprint): Cube
  • Load Max: 15 Amp Choice of 5, 10, 15 Amp. Load Rating
  • Size - 2" x 2" x 15/16"
More Information
  • Construction (footprint): Cube
  • Load Max: 15 Amp Choice of 5, 10, 15 Amp. Load Rating
  • Size - 2" x 2" x 15/16"
More Information
  • Construction (footprint): Open Board
  • Load Max: 10 Amp
  • Size - 2.437" x 3.962" x 1.5"
More Information
  • Construction (footprint): Cube
  • Load Max: 10 Amp
  • Size - 2" x 3" x 1.35"
More Information
  • Construction (footprint): Open Board
  • Load Max: 10 Amp
  • Size - 2" x 2" x 15/16"
More Information
  • Construction (footprint): Open Board
  • Load Max: 30 Amp
  • Size - 2.437" x 3.962" x 1.5"
More Information
  • Construction (footprint): Cube
  • Load Max: 30 Amp
  • Size - 2" x 3" x 135"
More Information
  • Series DPB
  • 1 and 2 pole.
  • Switches rated at 10,15 or 21 amperes with 0.187" or 0.250" male push-on termination.
  • Broad selection of pushbutton time ranges.
  • All international voltages and frequencies.
More Information
  • Construction (footprint): Plug in (8 or 11 pin)
  • Load Max: 10 Amp
  • Needs plug in socket
    More Information
Copyrights © 2016 All Rights Reserved by Prime Technology.