ELECTRONIC TIMERS

Inquiry

Series 130 - CAM Program Timers

9211
9211

    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. One "cycle" is one revolution of the output cam shaft.
    These may be wired for single revolution and stop operation . An external momentary pushbutton wired as shown on Homing will cause the camshaft to rotate 1 revolution only and come to an abrupt halt. During this cycle the cams perform the prescribed sequence of operations. This popular wiring is typified in cup dispensing coffee vending machinery.

Item #Item NameSeriesNo# of Poles (N)Switch Type (SW)VoltageFrequency
Item #Item NameSeriesNo# of Poles (N)Switch Type (SW)VoltageFrequency
130-4H2/D5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304H2120 V50 Hz
130-4H2/D6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304H2120 V60 Hz
130-4H2/D7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304H2120 V50 - 60 Hz
130-4H2/E5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304H2230 V50 Hz
130-4H2/E6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304H2230 V60 Hz
130-4H2/E7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304H2230 V50 - 60 Hz
130-4H2/L5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304H224 V50 Hz
130-4H2/L6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304H224 V60 Hz
130-4H2/L7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304H224 V50 - 60 Hz
130-4V1/D5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304V1120 V50 Hz
130-4V1/D6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304V1120 V60 Hz
130-4V1/D7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304V1120 V50 - 60 Hz
130-4V1/E5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304V1230 V50 Hz
130-4V1/E6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304V1230 V60 Hz
130-4V1/E7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304V1230 V50 - 60 Hz
130-4V1/L5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304V124 V50 Hz
130-4V1/L6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304V124 V60 Hz
130-4V1/L7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304V124 V50 - 60 Hz
130-4W2/D5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304W2120 V50 Hz
130-4W2/D6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304W2120 V60 Hz
130-4W2/D7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304W2120 V50 - 60 Hz
130-4W2/E5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304W2230 V50 Hz
130-4W2/E6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304W2230 V60 Hz
130-4W2/E7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304W2230 V50 - 60 Hz
130-4W2/L5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304W224 V50 Hz
130-4W2/L6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304W224 V60 Hz
130-4W2/L7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1304W224 V50 - 60 Hz
130-5H2/D5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305H2120 V50 Hz
130-5H2/D6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305H2120 V60 Hz
130-5H2/D7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305H2120 V50 - 60 Hz
130-5H2/E5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305H2230 V50 Hz
130-5H2/E6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305H2230 V60 Hz
130-5H2/E7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305H2230 V50 - 60 Hz
130-5H2/L5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305H224 V50 Hz
130-5H2/L6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305H224 V60 Hz
130-5H2/L7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305H224 V50 - 60 Hz
130-5V1/D5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305V1120 V50 Hz
130-5V1/D6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305V1120 V60 Hz
130-5V1/D7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305V1120 V50 - 60 Hz
130-5V1/E5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305V1230 V50 Hz
130-5V1/E6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305V1230 V60 Hz
130-5V1/E7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305V1230 V50 - 60 Hz
130-5V1/L5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305V124 V50 Hz
130-5V1/L6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305V124 V60 Hz
130-5V1/L7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305V124 V50 - 60 Hz
130-5W2/D5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305W2120 V50 Hz
130-5W2/D6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305W2120 V60 Hz
130-5W2/D7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305W2120 V50 - 60 Hz
130-5W2/E5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305W2230 V50 Hz
130-5W2/E6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305W2230 V60 Hz
130-5W2/E7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305W2230 V50 - 60 Hz
130-5W2/L5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305W224 V50 Hz
130-5W2/L6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305W224 V60 Hz
130-5W2/L7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1305W224 V50 - 60 Hz
130-6H2/D5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306H2120 V50 Hz
130-6H2/D6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306H2120 V60 Hz
130-6H2/D7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306H2120 V50 - 60 Hz
130-6H2/E5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306H2230 V50 Hz
130-6H2/E6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306H2230 V60 Hz
130-6H2/E7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306H2230 V50 - 60 Hz
130-6H2/L5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306H224 V50 Hz
130-6H2/L6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306H224 V60 Hz
130-6H2/L7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306H224 V50 - 60 Hz
130-6V1/D5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306V1120 V50 Hz
130-6V1/D6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306V1120 V60 Hz
130-6V1/D7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306V1120 V50 - 60 Hz
130-6V1/E5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306V1230 V50 Hz
130-6V1/E6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306V1230 V60 Hz
130-6V1/E7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306V1230 V50 - 60 Hz
130-6V1/L5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306V124 V50 Hz
130-6V1/L6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306V124 V60 Hz
130-6V1/L7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306V124 V50 - 60 Hz
130-6W2/D5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306W2120 V50 Hz
130-6W2/D6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306W2120 V60 Hz
130-6W2/D7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306W2120 V50 - 60 Hz
130-6W2/E5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306W2230 V50 Hz
130-6W2/E6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306W2230 V60 Hz
130-6W2/E7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306W2230 V50 - 60 Hz
130-6W2/L5
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306W224 V50 Hz
130-6W2/L6
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306W224 V60 Hz
130-6W2/L7
    Synchronous Motor Driven
    When energized a Program Timer repeats continuously and synchronously, a pre-established sequencing of ON/OFF switching events. Also known as Cam or Multi-cam Timer, Cycle or Re-cycle Timer, or Repeat Cycle Timer. On
1306W224 V50 - 60 Hz
Copyrights © 2018 All Rights Reserved by Prime Technology.