Input power is applied continuously. The first closure, momentary or sustained, of a normally open isolated initiate switch simultaneously starts timing of the preset delay period, and turns the load ON. At the end of the preset delay time the load turns OFF. Should a sustained isolated initiate switch closure be used to start timing it is necessary to open this switch to permit reset of the timer before the next cycle can occur. Re-closure of the initiate switch during timing has no effect.
Control the timing of valves, SFHP motors, lamps, relays, magnetic line starters, and actuators rated less than 1 ampere (10 amps inrush). CMOS digital circuitry, with solid state output switching. P/C boards and internal components are encapsulated in a flame retardant molded housing, fitted with quick connect wiring terminals. Available in all standard voltages and frequencies. Fixed or adjustable timing from 0.1 seconds to 24 hours.
- Timing Module
- Fully Solid State
- One Ampere Load Rating
- Life Expectancy - unlimited
- Environment Protected
- Tamper Proof
- No False Operate
- Small Size - 2" x 2" x 53/64"
- Lightweight - approximately 2.5 oz.