9211
9211
New!

6UT3-E1
Application of power simultaneously initiates timing of the preset interval and turns ON the load. At the end of the timed period the output transistor is driven to the off state, turning the load OFF. Power to the timer must be applied continuously throughout the timing period. Removal of power causes the timer to reset. The next cycle can then be initiated by re-application of power.

Control the timing of valves, small DC motors, lamps, relays, and actuators rated less than 1 ampere resistive. CMOS digital circuitry, with an NPN transistor output. P/C boards and timing components are conformal coated with a moisture material protective material. Available in 3 standard DC voltages with fixed or adjustable timing from 1 second to 6 hours.

  • Fully Solid State
  • Conformal Coated
  • One Amp. DC Load Rating
  • Life Expectancy - unlimited
  • Environment Protected
  • Tamper Proof
  • No False Operate
  • Small Size - 2" x 2" x 53/64"
  • Lightweight - Approximately 2.5 oz.
  • Input DC Only.

Specifications :

Series6UT3
Time Range (T)13.0 - 300 sec.
Voltage (DC)12 V
Repeat Accuracy± 0.1%
Reset Time150 ms
Operating Voltage Tolerance± 20 %
Load Current1 A
Dielectric Strength1500 VRMS
Min# Insulation Resistance100 MΩ
Input Transient ProtectionMOV
Operating Temperature-40 to +70 ºC
Storage Temperature-55 to +70 ºC
Relative Humidity (Operating)95 %
Linearity±5% Minimum from 10% to 90% of range
Timing Tolerance±9% + Tolerance of Rt Std., ±5% Special (Fixed)
Options (P)O - Customer Supplies Own Potentiometer or Resistor
A - Potentiometer Supplied as Loose Part
C - Factory Fixed Internal

Copyrights © 2016 All Rights Reserved by Prime Technology.